4
The sump in which the protein skimmer is installed should have a structure
that allows the breeding water to pass through a physical filter
(such as a wool mat),please make sure it can pass through the inside of
the protein skimmer without any trash.
Large garbage (such as live rock fragments and coral sand) may cause
clog and lead to pump failure.
Also, for those rearing with the Berlin System (protein skimmers only), similarly,
physically treat with wool or set up a sedimentation tank in the filtration tank.
3.
Remove the screw at the center of the bubble plate and divide it into four parts
(A, B, C, D).
4.
Place the parts D on top of the pump, and fix it with the fixing screw.
After that, stack parts C, B and A and fix them with screws.
5.
Screw
Screw
Part A
Part B
Part A
Part B
Part C
Part C
The shorter one in
the bottom
Direction of flow
from left to right
Part D
Fixing Screw
Cutout
Put the main unit on the bottom plate and fix it with 4 screws.
At that time, insert the pump cord into the cutout in the bottom plate.
