Zoomnet Bgate-GT10-D24-N22-P, Руководство пользователя

Страница: 28 / 31

Bgate-GT10-D24-N22-P
Zoomnet Confidential Proprietary @ 2013 Zoomnet Corporation. All rights reserved 19
Figure 5-2 Check VAP mode
5.5 Check and Modify VAP Channel
Step1. Enter the CLI interface of AP device by serial port or telnet tool.
Step2. Run the command: iwconfig interface channel X.Interface in this command is the
name of port, and X is a channel, such as iwconfig wifi0_wlan0 channel 11
Step3. Use command iwconfig interface to check information of the VAP. The value behind
Frequency
is channel value.
Figure 5-3 Check VAP Channel
5.6 Check and Modify Output Power
Step1. Enter the CLI interface of AP device by serial port or telnet tool.
Step2. Run the command iwconfig interface txpower X.Interface in this command is the
name of port, and X is a channel, such as iwconfig wifi0_wlan0 txpower 18.
Step3. Use the command iwconfig interface to check information of the VAP. The value
following TX-Power is channel value.
Figure 5-4 Check Output Power of VAP
5.7 Save configuration
By default, all configurations will restore to default settings when restart the AP device, so
you need to save the current configuration to prevent it being restored when restart AP.
Step1. Enter the CLI interface of AP device by serial port or telnet tool.
Step2. Run command “getall flash-conf” to save the current congiguration.
5.8 Backup Configuration to Local PC
You can follow the below steps to backup configuration to local computer.
Step1. Login the WEB page of AP