background image

82

ADSL 

X5v

 User’s Guide

 

You are dialing according to the guidelines your service
provider gave you. Your provider’s web site should provide

instructions and examples. For instance, you may need to dial

local calls as though they were long distance. Or, you may need

to dial a call within your country as though you were calling

from outside the country—beginning with an international

prefix such as 00, followed by the country code, city code or
area code, and local number.

 

You aren’t taking too long between digits when you dial a
number. If you take a very long time, the X5v may register that

you have completed dialing before you are through. If this is a

possibility, hang up and try again.

When some people call me, my Caller ID display doesn’t
work.
Some phones that display caller ID are very sensitive to ring type.
If you are using the VoIP version of the ring and tone sounds but

find that the Caller ID display on your phone is unreliable, try

switching back to the standard ring and tone configuration. See

page 34 for instructions.
The Caller ID setting may not be set to the right value for your
phone. You have one of two choices, Bell 202 or V.23. Go to the

X5v’s Voice over IP page and click the Advanced VoIP Setup
button
 to check your setting.
Your service provider may not pass through caller information for
all calls, in particular, DID calls to your VoIP connection that

come from the PSTN. Check with your provider’s customer

support.

My phone’s ring sounds strange.
If you don’t like the ring, you can change it. Go to the X5v’s VoIP
page and click Select Tone & Ring by Country/Region (see
page 34 for instructions on changing your ring). Note: Some

country selections include two choices, one of which is a special

VoIP ring. This ring sounds a little different from the standard ring

for that country or region.

Содержание X5V
























































































Отзывы: