Wireless-N USB Adapter
28
Your adapter has a button on the side of the unit to initiate a
WPS session. If you are using Mac OS X you can set up a
connection using the WPS button.
1
If you have not already installed the modem follow the
directions in
Chapter 4:.Installing the Wireless-N USB Adapter
in Mac OS X
.
2
On your Router, push the WPS button to initiate the WPS
session.
3
Now on your USB adapter push the WPS button located on
the side of the adapter in for 2 seconds to connect to your
Router. The blue led on the adapter will rapidly blink as it tries
to establish your network connection. When the adapter
stops blinking rapidly, your wireless connection has been
established.
Using WPS in Windows
WPS is supported through software in Windows 8 and Windows
7 only. To use WPS in Windows follow these steps:
1
If you have not already installed the modem, follow the
directions in
Chapter 2:.Installing the Wireless-N USB Adapter
in Windows.
2
Click the
Wireless Network Configuration
utility icon
in your computer’s system tray.
3
Select the network you want to connect to and then click
Connect
. If you want to connect to this network automatically
in the future, check the
Connect Automatically
checkbox.
4
If your Router supports WPS, Windows will give you the
option of entering your
Network Key
or pushing the WPS
button on your Router. Go ahead and push the WPS button
on your Router. Your adapter will automatically connect to the
Router.
