UIB-02 ONLINE MANUAL
10
4.
If necessary, disconnect the USB cable.
[NOTE]
This procedure must be followed every time you wish to terminate the USB connection between
the computer and the MRS series and turn the MRS series off.
P R O J E C T B A C K U P / R E S T O R E
You can copy a project from the MRS series recognized as a local disk to the hard disk
of the computer, for creating a backup. A backed-up project can be restored to the MRS
series at any time.
Backing up a project
1.
Start up the MRS series in USB mode and connect it to the Windows
computer with a USB cable. Verify that the online state is established.
2.
Open “My Computer” and double-click on the local disk representing the
MRS series.
The contents of the MRS series hard disk are shown. Project data are stored separately
in folders named “PROJxxx” (where “xxx” is the project number from 000 - 999).
[NOTE]
- The MRS-FAC disk volume is used by the system of the MRS-1266. Do not change the contents
of this volume.
- Other folders and files are used by the system of the MRS series. Take care not to accidentally
delete these.
3.
Select the folder of the project you want to back up, and select [Copy] from
the [Edit] menu on the menu bar.
4.
Open the backup destination drive/folder on the Windows computer and
select [Paste] from the [Edit] menu on the menu bar.
Backup of the project data is now complete. If necessary, back up other projects in the
same way.
