Zoom Sampletrak ST-224 Скачать руководство пользователя страница 33

Страница: 33 / 76

• Pad 7 (REVERSE)

Switches between reverse playback (on) and normal playback (oFF). When "on" is selected, playback

proceeds from the end point to the start point. Use the [- ] [+] keys or the [EDIT 1] wheel or the

[LOOP/MARK] pad to make the setting.

Setting values:

oFF, on (Default settings: oFF)

•

Pad 8 (TRIGGER/GATE)

Selects one of the following three playback modes. Use the [-] [+] keys or the [EDIT 1] wheel or the

[LOOP/MARK] pad to make the setting. This parameter is also valid for the [SOURCE] pad.

• Trigger playback

Sound starts when pad is hit once and stops when pad is hit again.

• Retrigger playback

Same as trigger playback, but hitting the pad during playback restarts from the beginning.

The [SOURCE] pad can not be set with this value.

• Gate playback

Sound is heard only while pad is held down and stops when pad is released (default).

Setting values:

trGGEr/rEtrG/GAtE (Default settings: GAtE)

Pad

Play

Mode

Operation

[Trigger playback]

Sample plays to the end when pad is hit once

[Gate playback]

[Re-Trigger playback]

Sample plays to the end when pad is hit once

Sample plays only while pad is held down

Sample stops when same pad
is hit again during play

Pressing a pad that is playing
stops play and then resumes
from the beginning

Содержание Sampletrak ST-224













































































Результаты поиска

Содержание Sampletrak ST-224

Отзывы:

Похожие инструкции для Sampletrak ST-224

Бренды по названию

Популярные бренды

Zoom Sampletrak ST-224, Руководство по эксплуатации

Результаты поиска

Содержание Sampletrak ST-224

Отзывы:

Похожие инструкции для Sampletrak ST-224

Бренды по названию

Популярные бренды