Zoom Sampletrak ST-224 Скачать руководство пользователя страница 16

Страница: 16 / 76

This section explains the basic configuration of the ST- 224 as well as some important terms used in this

manual.

The illustration below shows the basic configuration of the ST-224. As can be seen from the chart, the ST-224

is made up of three main sections.

• Sampler

Samples the audio signal and performs playback using the pads and sequencer.

• Sequencer

Stores data about pad operation to enable automatic sampler playback.

• Effects

Allows alteration of the sampler signal in various ways.

The analog signal supplied via the [INPUT R] and [INPUT L/MONO] jacks is converted into digital form by

the A/D converter and the resulting waveform data are stored in the memory of the sampler section (main

memory).

Sampled and stored sounds can be played back in various ways, for example by hitting the pads on the unit, by

the internal sequencer, or under control of an external sequencer connected via the [MIDI IN] jack. The

maximum number of samples that can be played simultaneously is 8 mono samples or 4 stereo samples.

The sound of the samples played by the pads or sequencer can be altered if desired by the effects section, and

then appears at the [OUTPUT R] and [OUTPUT L/MONO] jacks. It is also possible to return this signal to the

sampling section and sample it again (resampling).

In the ST-224, a waveform that has been sampled in one sampling process is called a "sample". Each sample

automatically receives a number and is stored in the main memory. The ST-224 can store a maximum of 32

samples, depending on the size of each sample.

After sampling, the entire sample or a part of it can be assigned to one of the pads 1 - 8 on the front panel, for

Introducing the ST-224

Introducing

the

ST-224

ST-224 Configuration

Samples

INPUT

Record

(Sampling)

MIDI IN

Effects

section

Sampler

section

Sequencer

section

Pads

OUTPUT

Playback

Resampling

Basic Configuration of ST-224

Main Memory

SAMPLE #1

SAMPLE #2

Empty area

Main Memory and Samples

Содержание Sampletrak ST-224













































































Результаты поиска

Содержание Sampletrak ST-224

Отзывы:

Похожие инструкции для Sampletrak ST-224

Бренды по названию

Популярные бренды

Zoom Sampletrak ST-224, Руководство по эксплуатации

Результаты поиска

Содержание Sampletrak ST-224

Отзывы:

Похожие инструкции для Sampletrak ST-224

Бренды по названию

Популярные бренды