ZOOM RFX-300
6
Adjusting
the
Sound
of
an
Ef
fect
Adjusting the Sound of an Effect
1.
To set the RFX-300 to the bypass mode,
press the BYPASS key.
The RFX-300 has two different bypass states,
depending on the currently selected effect. (For
information on which effects use which bypass type,
please refer to pages 7 - 11.)
• WET MUTE
In this condition, only the effect sound is muted.
The effects (A1 - A9) using the connection as
described in "Recording (2) (Send/Return)" on page
4 operate in this way. The original sound output
level depends on the MIX control position.
• DRY THRU
The original sound is output without any processing.
The setting of the MIX control has no effect.
2.
To return the RFX-300 to the normal state,
press the BYPASS key once more.
In bypass mode...
MIX control
minimum
MIX control
maximum
Original sound is
output unprocessed
No sound is output
Lit
To Make the Adjustment
Using the Bypass Function
The sound of effects provided by the RFX-300 can be modified by using the following controls.
The effects of the RFX-300 can be temporarily turned off. This is called the bypass mode.
TIME/ADJUST control
Adjusts the main effect parameter. Which
parameter this is depends on the currently
selected effect.
VARIATION/TAP key
This key is used to select effect variations and it also serves for the "tap input" function by which
the unit detects the key-press interval. The key operation depends on the currently selected effect.
Each push of the key toggles between
variation 1 (VARIATION/TAP key is out)
and variation 2 (VARIATION/TAP key is lit).
Time-based parameters such as delay time or flanger
modulation cycle can be easily input by tapping the key in
the desired interval (tap input).
If the key-press interval is larger than the maximum
possible setting for the current parameter, the parameter
is set to the maximum value of the tap input range.
MIX control
Adjusts the mixing ratio
of original sound and
effect sound, and also
serves to adjust other
parameters. Which
parameter this is
depends on the
currently selected
effect.
For information on
effects and adjustable
parameters, please
refer to page 7.
Variation 1
Variation 2
Flashes to indicate
input interval
When TAP indicator is lit
When VARIATION
indicator is lit
(2) Time until TAP key is pressed for
the second time is measured, and
the parameter is set accordingly.
(1) After TAP key is
pressed for the
first time...
Lit
When TIME indicator
is lit
When ADJUST indicator
is lit
Lit
Lit
The control can be used to adjust a
time-based parameter such as delay
time, reverb time, etc.
The control can be used to adjust another
parameter.
Lit
Lit
