Zoom RFX-300 Скачать руководство пользователя страница 12

Troubleshooting 

Specifications 

No sound or very low 
volume.

• Is specified AC adapter connected and 

power switch set to ON? 

Follow the instructions in "Turning the Unit 
On". 

• Is sound source connected correctly to 

INPUT jacks and are OUTPUT jacks 
connected correctly to playback equipment? 

Follow the instructions in "Getting 
Connected". 

• Are all shielded cables used for the 

connection okay? 

Try replacing the shielded cables. 

• Is MIX control set to maximum in bypass 

mode? 

Adjust MIX control. 

• Is the amplifier switched on? Is the volume 

at the sound source and amplifier set to 
proper position? 

Turn amplifier on. Adjust volume of sound 
source. 

Replace batteries. 

• Is INPUT control or OUTPUT control turned 

down? 

• Are the batteries exhausted? 

Adjust INPUT control and OUTPUT control.

Input sound breaks up 
or is distorted.

• Is input signal level too high? 

Adjust volume of sound source and set 
INPUT control to a suitable position. 

• Is LINE/MIC switch set to MIC? 

Set LINE/MIC switch to LINE. 

• Is input signal supplied both to phone jacks 

and RCA type phono jacks? 

Phone jack input and RCA type phono jack 
input cannot be used simultaneously. 
Connect a sound source only to one input. 

No effect sound

• Is unit set to bypass mode? 

Cancel bypass mode. 

• Is MIX control turned fully to direct sound 

side? 

Adjust MIX control to achieve proper 
balance between direct sound and effected 
sound. 

Symptom

Check Remedy

Number of Effect Programs 

11 x 2 banks 

Sampling Frequency

44.1 kHz 

Analog/Digital Conversion

18 bit, 64 times oversampling 

Digital/Analog Conversion

18 bit, 8 times oversampling 

DSP

ZOOM original ZFx-2 

Inputs 

L/MONO, R 

Standard monaural phone jack x 2 

Input impedance: 

22 kilohms 

Rated input level:

-10 dBm (Line) 

-56 dBm (Mike) 

L, R  

RCA type phono jacks 

Input impedance: 

22 kilohms 

Rated input level: 

-10 dBm 

Outputs

L, R

standard monaural phone jacks 

L, R

RCA type phono jacks 

Output load impedance:  100 ohms or more 

Max. output: 

+6 dBm 

Power Requirements

Supplied AC adapter 9 V DC, center

negative (AD-0006) 

Battery: IEC R6 (size AA) x 6 

Battery life: approx. 10 h (with

alkaline batteries) 

Dimensions 

168 (W) x 170 (D) x 59 (H) mm 

Weight

550 g 

*   0 dBm = 0.775 Vrms 

*   Design and specifications subject to change without notice. 

ZOOM CORPORATION

NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan
PHONE: +81-42-369-7116 FAX: +81-42-369-7115

Printed in Japan RFX-300-5000

Содержание RFX-300













Отзывы: