Using the VOCODER Effect
Controlling the RFX-2200 Effects from a Computer
* Rack mount screws are not
supplied with the unit.
MIDI IN
MIDI OUT
MIDI IN
OUTPUT
R
L
L
INPUT
R
MIDI
OUT
MIDI IN
RFX-2200
Sound source
module
Computer
MIDI interface
Playback system
In this connection example, third-party sequencer software is
used to switch patches and control parameter changes.
OUTPUT
R
R
L/MONO
L
INPUT
MIC IN
Keyboard amplifiers
Microphone
Synthesizer
MD player or sampler or similar
with recorded voice
RFX-2200
This is a connection example for using the VOCODER effect
from the SFX bank. Plug a mic into the front-panel MIC IN
connector, and connect a synthesizer or other instrument to the
rear-panel INPUT L/MONO jack. You can then use the mic to
vary the envelope (volume change curve) and the sound
character of the VOCODER effect.
If nothing is connected to the MIC IN jack, the signal supplied
to the INPUT L/MONO jack is controlled by the signal
supplied to the INPUT R jack. Verify that the indicator of the
MIC ON/OFF switch is lit. If not, press the switch so that the
indicator comes on.
Rack Mounting
Getting Connected
Rack
Mounting/Getting
Connected
ZOOM RFX-2200
5
