16
2. After configuring the parameters of Static IP WAN connection as above, click ‘Apply
Changes’ to finish the setting.
6.2
Configure Bridge WAN Connection for Internet
1
.
Login ONU WEB, select Network -> WAN->WAN, and then there are some
parameters for us to configure as follows:
【
Enable Vlan
】
We can set this option according to your network plan. If there is
vlan in the network for internet, we have to check ‘Enable VLAN ‘option. If not, we needn’t
check this option, which will be VLAN transparent mode.
【
Vlan ID
】
Configure this option according to our network plan.
【
802.1p_Mark
】
Set the priority of vlan, The same as "enable Vlan", depending on
the network vlan planning to configure. The default priority is 0.
【
Service Type
】
Choose Bridged.
【
Admin Status
】
default is Enable.
【
Connect Type
】
Choose Internet.
【
Port Mapping
】
Bind the physical ports (Lan port 1-4 and wireless) with Bridge
WAN connection.
Note:
By default, all LAN ports and WIFI data are not bound by this WAN connection
(a LAN and WIFI SSID can only be bound to a WAN conection at the same time).
Содержание Realtek Series
Страница 1: ...GPON HGU 4GE WIFI Dual Band Voice User Guide Version V1 0 ...
Страница 27: ...24 11 2 Check the VoIP Register Status and VOIP Call History 1 Login onu s web select VoIP Register Status ...
Страница 28: ...25 2 Login onu s web select VoIP Status VIP Call History ...
Страница 30: ...27 12 3 Device Reboot Login the ONU WEB Select Click Reboot Restart the device immediately after application ...