Zoom Realtek Series, Руководство пользователя

Страница: 16 / 31

13
【
Vlan ID
】
Configure this option according to our network plan.
【
802.1p_Mark
】
Set the priority of vlan, The same as "enable Vlan", depending on
the network vlan planning to configure. The default priority is 0.
【
Service Type
】
Choose IPOE.
【
Eable NAPT
】
Check ‘ NAPT ’ feature
；
NAPT is mainly used for address translation
function of local network and external network. The default is checked
enable status. If you do not check this option, maybe you can’t surf the
internet.
【
Admin Status
】
default is Enable.
【
Connect Type
】
Choose Internet.
【
MTU
】
The default is 1500; we have to change to lower MTU, such as 1400, if we
can ping the DNS but not access the website via WEB browser.
【
IP Protocol
】
Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘ Ipv4/Ipv6 ’.
【
Type
】
Select ‘ DHCP’.
【
Request DNS
】
Selected ‘enable’, the ONU will get DNS from upper DNS server
automatically; Selected ‘Disable’, we have to configure an static
DNS for the ONU by manual. We can configure one of them
according to network plan.
【
Port Mapping
】
Bind the physical ports (Lan port 1-4 and wireless) with DHCP
WAN connection.
Note: By default, all LAN ports and WIFI data are not bound by this WAN connection (a
LAN and WIFI SSID can only be bound to a WAN connection at the same time).
2.After configuring the parameters of DHCP WAN connection as belows, click
‘Apply Changes’ to finish the setting.