Zoom LiveTrak L-12 Скачать руководство пользователя страница 95

Страница: 95 / 100

Troubleshooting

General

There is no sound or output is very quiet

• Check the speaker connections and volume settings on the speakers.
• Check instrument and mic connections

• When using a condenser mic, turn on.
• Confirm that the SIG indicators are lit green.

• Confirm that is unlit.
• Raise all the channel faders and the master fader, and confirm that the level meters are lit.

• Confirm that the MASTER

is unlit or is lit red.

Recorded audio is too loud, too quiet or silent

• Adjust input gains and confirm that SIG indicators are lit green.

• When using a condenser mic, turn on.

• When recording to an SD card, confirm that

is lit red.

Recording not possible

• When recording to an SD card, confirm that

is lit red.

• Confirm that the SD card has open space.
• When recording to an SD card, confirm that the project is not protected (to prevent overwriting).

Playback sound cannot be heard or is quiet

• When playing data from an SD card, confirm that

is lit green.

• Raise the faders on the playback channels, and confirm that the level meters are lit.

The sounds of devices connected to input jacks are distort-

• Confirm that SIG indicators are not lighting red. If they are lighting, lower their input gains. You can also

turn on.

• Confirm that level meters are not lighting to their highest levels. If a level meter is lighting to its highest

level, lower its fader.

Содержание LiveTrak L-12





































































































Результаты поиска

Содержание LiveTrak L-12

Отзывы:

Похожие инструкции для LiveTrak L-12

Бренды по названию

Популярные бренды

Zoom LiveTrak L-12, Руководство по эксплуатации

Результаты поиска

Содержание LiveTrak L-12

Отзывы:

Похожие инструкции для LiveTrak L-12

Бренды по названию

Популярные бренды