background image

Appendix D: Regulatory Information

41

Appendix 

D

Regulatory Information

FCC Part 15 Emissions Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications.
However, there is no guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Emissions Statement

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

Electrostatic Discharge Statement

This unit may require resetting after a severe electrostatic discharge event.

Declaration of Conformity

The manufacturer declares under sole responsibility that European models of this
equipment comply to Directive 1999/5/EC (R&TTE Directive) via the following:

Directives

Standards

73/23/EEC

EN 60950 (1992) with the following
Amendments: A1, A2, A3, A4, and A11

89/336/EEC

EN 55024 (1998)

89/336/EEC

EN 55022 (1998)

The product is CE marked.

Содержание CableModem











































Отзывы: