Zoom ADSL X5v 5565 Скачать руководство пользователя страница 72

Страница: 72 / 87

ADSL

X5v

User’s Guide

VoIP and regular calls using all the handsets.

Note: If you have a wireless network that operates over the typical

2.4GHz frequency and you want to use cordless phones, it is best if
you use 900MHz or 5GHz phones; that way, you will minimize any

chance of interference.

Install the X5v Where Your Phone
Line Enters Your Home (USA Only)

In many homes, there is a telephone jack where the phone line
enters the house. This box is called the “demarcation point.” It

marks the point where the Phone Company’s wiring ends and your

wiring begins. This is an excellent place to install your X5v and
connect it so that it provides VoIP capability to all the phones in

your home.
There is a catch. To use the ADSL line, you need to connect your
X5v gateway to the demarcation point’s jack and to either a wired

or wireless network. If you have a wired network, you simply run a

network cable to the gateway as you would in a typical installation

scenario. If you don’t have a wired network, plugging the gateway

into an 802.11 wireless access point is a fast, inexpensive, and

convenient way to deliver your ADSL connection to one or more

computers without running wires.
To connect your phones, disconnect the modular plug at the
demarcation point and plug it into the X5v’s jack marked

PHONE. (If the demarcation point doesn’t have a modular plug,

you will need to unwrap the wire that is providing the connection.
You may have to call a technician if you do not have a modular

plug.) Then connect one end of the phone cord that came with the

X5v into its ADSL jack and the other end into the jack on the

demarcation point. With the computer’s power off, check that your

phones work normally.

Содержание ADSL X5v 5565
























































































Результаты поиска

Содержание ADSL X5v 5565

Отзывы:

Похожие инструкции для ADSL X5v 5565

Бренды по названию

Популярные бренды

Zoom ADSL X5v 5565, Руководство пользователя

Результаты поиска

Содержание ADSL X5v 5565

Отзывы:

Похожие инструкции для ADSL X5v 5565

Бренды по названию

Популярные бренды