Zoom 708II Bass, Руководство по эксплуатации

Страница: 34 / 40

ZOOM 708II BASS
Effect
Types
and
P
arameters
34
125Hz
-12 – 0 – 12
250Hz -12 – 0 – 12
■
PAGE 2
500Hz -12 – 0 – 12
1000Hz
-12 – 0 – 12
2000Hz
-12 – 0 – 12
■
PAGE 3
4000Hz -12 – 0 – 12
8000Hz -12 – 0 – 12
Adjusts boost/cut in respective frequency range.
LEVEL
1 – 8
This equalizer effect divides the signal into three bands
(high/mid/low) and allows free adjustment of mixing
balance. There are two pages with parameters. Use the
[EDIT] key to switch between pages.
■
PAGE 1
HIGH oF, -12 – 0 – 12
MID oF, -12 – 0 – 12
LOW oF, -12 – 0 – 12
Adjusts boost/cut in respective frequency range.
■
PAGE 2
FREQ L 5 – 8.0, 0.0
(5=50Hz, 8.0=8kHz, 0.0=10kHz)
Adjusts crossover frequency between low and mid
frequency bands.
FREQ H 5 – 8.0, 0.0
Adjusts crossover frequency between mid and high
frequency bands.
LEVEL 1 – 8
This enhancer stresses a particular frequency range. The
range is different for the several variations.
* Parameters for TYPE 6 variations are the same.
MIX
0 – 30
Adjusts enhancer intensity.
FREQ 1 – 10
Adjusts frequency to be enhanced.
LEVEL 1 – 8
This effect is a combination of compressor and enhancer,
tuned to achieve a fat lower midrange sound.
This effect is a combination of compressor and enhancer.
* Parameters for FATCLN and FLTCLN variations are the
same.
COMP oF, 1 – 30
Adjusts compressor sensitivity.
ENHANC oF, 1 – 10
Adjusts enhancer intensity.
LEVEL
1 – 8
This effect is a combination of limiter and enhancer,
tuned to achieve a lean midrange sound.
LIMIT
oF, 1 – 30
Adjusts limiter sensitivity.
ENHANC
oF, 1 – 10
LEVEL
1 – 8
Standard booster sound.
Standard overdrive sound.
Modern overdrive sound.
Fuzz sound with strong distortion.
Standard distortion sound.
Overdrive sound suitable for heavy metal.
* Parameters for TYPE 8 and 9 variations are the same.
GAIN 1 – 30
BAL 0 – 10
Adjusts mixing balance of direct sound and effect sound.
LEVEL
1 – 8
Combination of octaver and fuzz sound.
GAIN
1 – 30
OCTMIX
0 – 30
Adjusts mixing balance of direct sound and 1-octave lower
sound.
LEVEL 1 – 8
Combination of compressor and octaver.
COMP
oF, 1 – 30
Adjusts compressor sensitivity.
OCTMIX 0 – 30
LEVEL 1 – 8
Combination of enhancer and octaver.
ENHANC
oF, 1 – 10
OCTMIX
0 – 30
LEVEL
1 – 8
Vintage bass sound effect. There are two pages with
parameters. Use the [EDIT] key to switch between pages.
■
PAGE 1
DECAY
1 – 30
Adjusts tone variation speed.
Parameter 1
V-SYN CLASSIC
BASS SYNTH (Bass Synthesizer)
TYPE 11
Parameter 3
Parameter 2
Parameter 1
OCTENH MODERN
Parameter 3
Parameter 2
Parameter 1
CMPOCT STANDARD
Parameter 3
Parameter 2
Parameter 1
OCTFUZ CLASSIC
OCTAVE (Octaver)
TYPE 10
Parameter 3
Parameter 2
Parameter 1
THRASH MODERN
DIST STANDARD
FUZZ CLASSIC
DIST/FUZZ (Distortion/Fuzz) TYPE 9
SP OD MODERN
OD STANDARD
BOOST CLASSIC
OVERDRIVE
TYPE 8
Parameter 3
Parameter 2
Parameter 1
SHPCLN MODERN
Parameter 3
Parameter 2
Parameter 1
FITCLN STANDARD
FATCLN CLASSIC
CLEAN TYPE 7
Parameter 3
Parameter 2
Parameter 1
HI-ENH MODERN
BP-ENH STANDARD
LO-ENH CLASSIC
ENHANCE (Enhancer) TYPE 6
Parameter 3
Parameter 2
Parameter 1
Parameter 3
Parameter 2
Parameter 1
ISOLTR MODERN
Parameter 3
Parameter 2
Parameter 1
Parameter 3
Parameter 2
Parameter 1
Parameter 3
Parameter 2