Zoom 5350, Руководство пользователя

Страница: 17 / 108

If you know that all your devices support the more secure WPA2 you can enable WPA2 only (or
WPA2-PSK if you want to use a Pre-Shared Key) instead of WPA and WPA2.
7
In the WPA Pre-Shared Key text box (only if you selected an option requiring a Pre-Shared Key),
enter a passphrase of your choice (a minimum of 8 characters). Write down this passphrase and
put it where you can find it – on the bottom of the Cable Modem/Router case, for instance.
8
Click Apply .
9
Now you need to set up each of your wireless devices with the SSID and passphrase.
a
First, make sure that the device's wireless capability is switched on. (Many
notebooks have a switch for wireless, for instance.)
b
Next go to the device’s area for configuring a wireless network connection. (If you
need them, tips for finding this area are in
Appendix A .)
•
For a Windows computer, click the Wireless Networking icon at the
lower right corner of the screen.
•
For another device such as an iPhone or iPad, you may have to click on
something like Settings and then WiFi. Skip (c) and continue with (d)
below.
c
Select the Site Survey or Scan option to see a list of the access points in your area.
That list should include the SSID ZOOM or the SSID you created.
d
Select ZOOM (or the SSID you created).
Note: If any of your devices support WPS , you can configure WPS for those
devices. Press the WPS LED pushbutton on the front panel of the router for 5
seconds. The WPS LED should blink green. Within 2 minutes (before the WPS
LED light turns off), press the WPS button on the device that you’re linking
wirelessly to the modem/router. The button may be a physical pushbutton on the
device or a button on a page of the device’s wireless network configuration menus.
Skip (e) and (f).
Windows 7 (SP1) Service Pack 1 or the latest updates, or Windows Vista SP2
users
, you can use WPS for easy configuration. Click Connect . Then press the
17