Zoom 3030 zoom player, Руководство по эксплуатации

Страница: 37 / 40

(3) F.B (Feedback)
Determines the amount of feedback for the delay sound.
(4) Mode
Determines the pattern for the Pingpong delay.
1: MONO DLY
2: PINGPONG DLY
(5) Mix
Determines the balance between the effect sound and the
direct sound. When the setting is 0, only the direct sound
is output; the larger the value, the more the effect sound
is output.
When using the 3030 in monaural, only the longest
delay sound is output to the OUTPUT L/MONO jack
(the opposite result of Effect Module 6 PINGPONG
DLY).
Determines the settings for the EXP/VOL pedal, the
method of connecting the effect modules of EFF1 and
EFF2 and the parameters for the overall functioning of the
3030.
Parameter 1 Pedal-Assign 0 – 6
Parameter 2 Pedal-Mode 1 – 2
Parameter 3 Seri/Para S/P
Parameter 4 Amp Sim 0 – 3
Parameter 5 Master Vol 0 – 50
Parameters 1-3 are stored as part of a patch.
Explanation
(1) Pedal-Assign
Determines the parameters assigned to the EXP/VOL
pedal.
0: OFF
1: VOL
2: WAH
3: DIST
4: EFF1/SFX
5: EFF2
6: REV
(2) Pedal-Mode
Determines the way the output sound changes in
accordance with where the pedal is pressed.
1: Mode 1
2: Mode 2
See page 21 for the workings of these modes.
(3) Seri/Para (Serial/Parallel)
Determines the method for connecting effect modules
EFF1 and EFF2.
S = Serial
P = Parallel
When EFF1 and EFF2 are serially connected, the signal
flow is as follows:
When EFF1 and EFF2 are connected in parallel, the
signal flow is as follows:
Further, when you have selected an SFX effect type with
the EFF1/SFX effect module, the EFF2 effect module
switches OFF automatically. In this case, the signal flow
is as follows:
Parameters 4 and 5 below work in the same way for all
the 3030 patches. They cannot be stored separately for
each patch.
(4) Amp Sim (Amp Simulator)
The on-board amp simulator function enables the
reproduction of realistic guitar amp sounds for when you
listen to the 3030 using headphones or audio speakers.
0: OFF
The AMP SIMULATOR function is switched OFF.
1: COMBO
Simulates the sound of a 100 W combo amp.
2: BRIGHT COMBO
Simulates the sound made by a bright amp that
accentuates the 120 W high range.
3: STACK
Simulates the sound made by stacked amps
consisting of four speakers.
(5) Master Vol (Master Volume)
Determines the final volume for the 3030 overall.
You can change MASTER VOLUME during Play
mode. See page 8 for details.
HINT HINT
NOTE
from
EQ2
SFX REV
DRY
SFX OUT
Lch
Rch
REV WET 1
REV WET 2
SFX OUT
WET
from
EQ2
EFF1
EFF2
REV
DRY
Lch
Rch
REV WET 1
REV WET 2
EFF1 OUT
EFF2 DRY
EFF2 WET 1
EFF1 OUT
EFF2 DRY
EFF2 WET 2
EFF2 OUT
EFF1 OUT
WET
DRY
WET 1
WET 2
from
EQ2
EFF1 EFF2 REV
DRY
EFF2 DRY EFF2 DRY
Lch
Rch
EFF2 WET 1
EFF2 WET 2
REV WET 1
REV WET 2
EFF2 DRY EFF2 DRY
WET
WET 1
WET 2
NOTE
TOTAL (Total Parameter)
NOTE
■
35
EFFECT
TYPES
AND
P
ARAMETERS