background image

34

 

Cet appareil numérique de la classe B respecte toutes les exigences du 
Règlement sur le matériel brouilleur du Canada. 

US FCC Part 15 Emissions Statement  

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate 
radio frequency and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

ƒ

  Reorient or relocate the receiving antenna. 

ƒ

  Increase the separation between the equipment and receiver. 

ƒ

  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

ƒ

  Consult the dealer or an experienced radio/TV technician for help. 

Industry Canada Emissions Statement  

This Class B digital apparatus meets all requirements of the Canadian 
Interference-Causing Equipment Regulations. 
Cet appareil numérique de la classe B respecte toutes les exigences du 
Règlement sur le matériel brouilleur du Canada. 

Electrostatic Discharge Statement 

The unit may require resetting after a severe electrostatic discharge event. 

Safety Notices 
CAUTION: 

To reduce the risk of fire, use the supplied phone cord or an 

AWG 26 or larger UL listed or CSA certified telecommunication line cord. 
Do not use this product near water – for example, in a wet basement or near 
a swimming pool. 
Avoid using this product during an electrical storm. There may be a remote 
risk of electric shock from lightning. 

Содержание 08-15356





































Отзывы: