28
GB
Fitting the mitre guide
Push the mitre guide into the slot in the
saw bench. Set the angle as required and
tighten the mitre guide securely with the
thumb screw.
Fitting the feet
Secure the feet to the underneath of the
fretsaw using nuts and bolts.
Fitting the dust blower
The dust blower keeps the area around the
saw blade free of sawdust so you can follow
the saw line more easily.
Screw one end of the saw blower tube
securely to the coupling on the top of the
fretsaw.
Setting the bevel angle
Loosen the knob for bevel adjustment (2)
and tip the bench to the required angle
between 0 and 45 degrees.
Retighten the knob.
