24
GB
Present the item to the stone slowly,
increasing pressure gently and gradually.
Never present the item abruptly to the
stone, as this may cause the item to kick
back and damage the grinding stone or
cause injury to the user or other people.
Hold the item fi rmly with both hands
to prevent it getting stuck between the
grinding stone and rest, which can damage
the stone.
Cool the item in water at regular intervals
when working for extended periods.
When grinding tools, never allow the metal
to blue.
Never grind materials such as wood, plastic
or soft metals (e.g. lead) as they will block
the pores of the grinding stones, reducing
their eff ectiveness.
Replacing grinding stones
Remove the spark screen and rest.
Loosen the nut on the outer fl ange using
an adjustable wrench and remove the outer
fl ange. NB! The right-hand spindle (seen
from the front) has right-hand thread whilst
the left-hand spindle has left-hand thread.
Remove the grinding stone.
Remove any fi lings from around the spindle
and fl anges.
Fit the new stone, outer fl ange and lock nut.
Replace the rest and spark screen.
Start the grinder and let it run freely for
a few seconds to check that the stone is
correctly fi tted. This procedure will also
tighten the lock nut automatically as the
thread direction is opposite to rotation.
Cleaning and maintenance
The grinder can be cleaned by wiping its
exterior parts with a damp cloth. Grinding
dust and fi lings can be removed using a
brush or compressed air.
Do not use corrosive or abrasive cleaning
agents.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 07.00 to 17.00
(Fridays until 15.30)
• E-mail: [email protected]
