39
ENGLISH
[6] Place the front wheel on the correction bench
and rotate the front wheel at a higher speed with
hands in order to check the front wheel axle for
wear and its free travel. Check the front wheel axle
for wear. In case it is worn, install a new one.
If S&R is heard or free travel is too long, install
a new bearing. Apply lubricating grease to the
bearing before installing the front wheel bearing
with the oil seal face oriented outboard.
Caution
[9] Check the front outer tube for wear. The
maintenance limit value for front tire tread:
2.00mm. If front tire pressure is poor as the
motorcycle is being used, check the inner tube
’
s
valve core for air leak and check the inner tube for
air leak.
Caution
In case of air leak from inner tube
’
s valve core,
fix it or install a new valve core. In case of air leak
from inner tube, repair it or install a new inner
tube.
[7] In case the front wheel bearing is severely worn
or damaged, knock the front wheel bearing out
gently using a bearing extractor and install a new
one.
[8] Place the front wheel on the correction bench
and check the front wheel for deflection and rotate
the front wheel manually. Measure the deflection of
front wheel using a dial gage. Read the value.
Maintenance limit value: radial 2.0mm
axial 2.0mm
Caution
Apply lubricating grease to the bearing before
installing the front wheel bearing with the oil seal
face oriented outboard.
Fasten the front wheel axle locking nut before
fastening the front wheel axle and later, fasten
two hexagon socket screws on the front shock
absorber.
If the deflection of front wheel exceeds the
maintenance limit value, 2.0mm, correct it or
install a new front wheel.
Remove front
wheel bearing
Check front outer tube
Check the front
wheel bearing
Measure deflection
of front wheel
