6
6
Info Screen
The Info Screen displays information about the ZVK-77D you have. This includes the version of firmware E.G. 1.3.2.0, the
network status, (not detected means that the ZVK-77D is not currently connected to a ZoneVu network), and the keyboard
Module Access Code (MAC). If you request technical support you maybe asked for this information.
The Info Screen is accessed from the Select Mode Menu by pressing the
softkey
directly adjacent to the menu option INFO
SCREEN.
PCI Mode
PC Interactive or PCI mode is a special interactive mode of operation when the ZVK-77D is operated in tandem with a
Meyertech FUSION workstation. In this mode only the camera control facilities of the ZVK-77D are available to the operator.
Selection of the system cameras is performed exclusively by the FUSION workstation. The interactive nature of FUSION and
the ZVK-77D ensures that the camera displayed on an operators spot monitor is the one controllable from the ZVK-77D.
Site Mode
What you can do in Site Mode.
You can select a Monitor.
01. Press the
Softkey
directly adjacent to the menu option, CHANGE MONITOR.
02. Now enter a monitor in the range 1 – 999 using the Numeric Keypad followed by
Enter.
You can select a Site.
01. Press the
Softkey
directly adjacent to the menu option, SELECT SITE.
02. Now enter a site in the range 0 – 999 using the Numeric Keypad followed by
Enter.
03. Input a camera in the range 0 – 999 using the Numeric Keypad followed by
Enter.
Note that Site 0 is always the site you are at, it is your local site and is equivalent to operating the keyboard in Clasik mode.
You can select a Camera.
01. Press the
Softkey
directly adjacent to the menu option, SELECT CAMERA.
02. Now enter a camera in the range 0 – 999 using the Numeric Keypad followed by
Enter.
There is an alternative method to select a camera.
01. Using the Numeric Keypad directly enter the camera number you require in the range 0 – 999 followed by
Enter.
