Zonet ZVC7611, Руководство пользователя

Страница: 8 / 60

4
Port & Button Description
Power Jack Where you can connect the power adapter
LAN Port Where you can connect the RJ-45 Ethernet cable
Antenna Connector
(ZVC7611W Only)
This is standard Reverse SMA connector where any
antenna with Reverse SMA connector can connect to
ZVC7611W
Reset Button
1.
If problems occur with your ZVC7611/ZVC7611W,
press the reset button with a pencil tip for less than 2
seconds and the camera will re-boot itself, keeping your
original configurations.
2.
If problems persist or you experience extreme
problems or you forgot your password, press the reset
button for longer than 5 seconds and the camera will
reset itself to the factory default settings
Note : your original configurations will be replaced with
the factory default settings.
4.3 Connecting ZVC7611/ZVC7611W to Your Network
1. Connect ZVC7611/ZVC7611W to
your network by provided RJ-45
Ethernet cable from the
switch/router to the LAN port of
ZVC7611/ZVC7611W.
2. Connect the power adapter to
the ZVC7611/ZVC7611W and
plug the power adapter to power
socket. ZVC7611/ZVC7611W will
be powered on. When the
ZVC7611/ZVC7611W is ready,
the POWER LED will steady blue.