Page
45
Step 2. Run the
WINIPCFG
command. (Figure A-34)
Figure A–34
Step 3. To release the previous IP settings in your computer, choose your network interface card
in the menu. Then click the
Release
button. (Figure A-35)
Figure A–35
Step 4. To obtain new IP settings from WPD –140, click the
Renew
button. As listed below, the
IP address is your client computer’s LAN IP address, and the Default Gateway is
ZSR0104C SERIES IP address. Make sure that your IP Address is 10.0.0.xxx, (xxx ranges
from 2 to 254) your Subnet Mask is 255.0.0.0, and your Default Gateway is 192.168.1.1.
These values confirm that your ZSR0104C SERIES is functioning.
(Figure A-36)
Figure A–36
