9
4.2 Wizard
Click
Next
from the welcome screen to enter setup Wizard. There are five different
operating modes including —AP, WDS P2P Bridge, WDS P2MP Bridge, WDS AP Repeater
and Client. For different requirements, you can select one of the suitable operating
modes.
Note : If the Wizard page hasn’t appears, click the wizard tab on the left to active.
Note: The settings below are based on AP mode. For other modes, same procedure but different
screen.
1. Select AP mode and click
Next
.
2. Click
Next
to continue or
Back
button to return to the previous screen.
•
SSID:
The name of your wireless network. The same name (SSID) must be assigned to
all wireless devices in your network. The default SSID is 802.11g Wireless AP, but it is
recommended strongly that you change your networks name (SSID) to a different
value. This value is case-sensitive.
•
Channel:
From 1 to 13, this field determines which operating frequency will be used.
It is not necessary to change the wireless channel unless you notice interference
problems with another nearby access point.
All manuals and user guides at all-guides.com
all-guides.com
