pg. 2 - D1201 Installation -
INSTALLATION INSTRUCTIONS
1.
Park vehicle on clean, flat, and level surface. Block the rear wheels for safety
2.
Remove the front trackbar hardware from the frame. Keep the bolt and nut tab for
reinstallation later. (Fig 1)
Figure 1
3.
Raise the front of the vehicle and support frame rails with jack stands. Support the
front axle with a hydraulic jack, and remove the front wheels.
4.
Disconnect the sway bar links from the sway bar, and allow the sway bar to swing
up. (Fig 2)
Figure 2
*Important* Verify you have all of the kit components before beginning installation.
D1201 Kit Contents
Qty Part
2
Dodge 3500 Spacers
1
605 Bolt Pack
2
7/16" x 1-1/4" Bolts
4
7/16" Washers
2
7/16" Nuts