background image

G U I T A R S

G U I T A R S

33

32

ZDP-1 

(Mosaic)

& ZAP3 

(Mosaic Pro)

Description: 

Hand-assembled components housed in an

electrostatically shielded, epoxy module

Function:  

Master volume, pickup blend, bass, mid and

treble boost/cut

Specifications:

Output level N/A

Power requirements: 

Two 9-volt batteries

Battery life expectancy:

300 hours continuous use

About the system

Master volume control. 

Controls overall volume level. Turning the con-

trol clockwise increases the volume; turning the control counterclock-

wise decreases the volume.

Pickup blend control. 

Controls relative blend of pickups. Turning the

control clockwise emphasizes the bridge pickup. Turning the control

counterclockwise emphasizes the neck pickup. The detent, or “click,” in

the center of the control is the point where both pickups are on equally.

Bass control. 

15dB boost or cut of bass at a center frequency of 50

Hz. Turning the control clockwise boosts the bass. Turning the control

counterclockwise cuts the bass. The detent, or “click,” in the center of

the control is the “flat” position, zero boost or cut.

Midrange control.

15dB boost or cut of midrange at 400 Hz. Turning

the control clockwise boosts the mids; turning the control counterclock-

wise cuts the mids. The detent, or “click,” in the center of the control is

the “flat” position, zero boost or cut.

Treble control.

15dB boost or cut of treble at a center frequency of

5kHz. Turning the control clockwise boosts the treble. Turning the con-

trol counterclockwise cuts the treble. The detent, or “click,” in the center

of the control is the “flat” position, zero boost or cut.

Bass boost/cut

Mid boost/cut

Master volume

Treble boost/cut

Pickup blend

Содержание Legacy Elite Special4






















Отзывы: