background image

G U I T A R S

G U I T A R S

27

26

ZB-4.0 

(Sonus RT & RT Deluxe)  

& ZB-4.3 

(Sonus 519) 

Description:

Hand-assembled components housed in an

electrostatically shielded, epoxy module

Function: 

Master volume, pickup blend, bass,

midrange, and treble boost/cut with 3-posi-

tion midrange frequency switch

Specifications: 

Output level -10dBm

Power requirements:

One 9-volt battery

Battery life expectancy:

500 hours continuous use

About the system

Master volume control.

Controls overall volume level. Turning the con-

trol clockwise increases the volume; turning the control counterclock-

wise decreases the volume.

Pickup blend control. 

Controls relative blend of pickups. Turning the

control clockwise emphasizes the bridge pickup. Turning the control

counterclockwise emphasizes the neck pickup. The detent, or “click,” in

the center of the control is the point where both pickups are on equally.

Bass control.

15dB boost or cut of bass at a center frequency of 50

Hz. Turning the control clockwise boosts the bass. Turning the control

counterclockwise cuts the bass. The detent, or “click,” in the center of

the control is the “flat” position, zero boost or cut.

Midrange control. 

15dB boost or cut of midrange at a center frequency

determined by the switch selection. Turning the control clockwise boosts the

mids. Turning the control counterclockwise cuts the mids. The detent, or

“click,” in the center of the control is the “flat” position, zero boost or cut.

Treble control.

15dB boost or cut of treble at a center frequency of

5kHz. Turning the control clockwise boosts the treble. Turning the con-

trol counterclockwise cuts the treble. The detent, or “click,” in the center

of the control is the “flat” position, zero boost or cut.

Mid frequency switch.

Down position @ 250 Hz. Center position @

400 Hz. Up position @ 700 Hz. 

Trimmer. 

This control on the circuit module attenuates overall output

level. Its factory setting is the mid position.

Caution: 

Setting gain too high may cause distortion.

9-V

olt Battery

Midrange

Treble (center)

Mid frequency switch (ZB-4.3 only)

Master volume

Pickup blend

Bass (outer ring)

Trimmer attenuates

overall output level

Trimmer sets pickup input

level (ZB-4.0 only)

Содержание Legacy Elite Special4






















Отзывы: