ZOLL SurePower, Руководство оператора

Страница: 21 / 44

Installing Battery Well Spacers (Optional)
9650-0535-01 Rev. C SurePower Charger Station Operator’s Guide 2-3
Installing Battery Well Spacers (Optional)
The SurePower Charger Station is designed to accept molded plastic battery well spacers that you
can install in the back of the charging bays ( REF 8050-0032-01). Use these well spacers if you
will be charging only SurePower Battery Packs . The well spacers improve the fit of SurePower
Battery Packs in the charger bays and prevent older ZOLL lead acid batteries from being used
with the charger.
Figure 2-3 Battery Well Spacer (
REF
8050-0032-01) .
To install the battery well spacer, use the screws provided and the pre-drilled holes in the back
of the battery bay to secure the bay spacers as shown in the following illustration.
Figure 2-4 Installing the Battery Well Spacer