© 2016 ZOLL Data Systems, Inc. All rights reserved.
10
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
RS-4000 - ON-BOARD COMPUTER
Records and stores event information. The on-board computer is the main control unit for inputs, outputs, and
driver communication.
Bulkhead mounting. The unit may be mounted in any of 24 three dimensional positions. See Appendix B
for positions and their associated Orientation Index Number.
Acceptable Mounting Location- In the equipment cabinet if there is enough clearance and the harness will
reach, somewhere behind one of the seats or directly on the bulkhead. The location must be within the
OEM imposed length limit for the OBDII/CAN cable of 16 feet (4.87 meters).
*Extensions to the cable are not recommended or supported by ZOLL. DO NOT modify the cable
RS-4202 – WINDOW MOUNT GPS ANTENNA
Determine the installation location of the antenna on the windshield or dashboard. Keep in mind that the GPS
antenna cannot "see" through metal. Unobstructed line of sight is required. The GPS antenna should not be
placed near any physical obstruction like the "A" pillar, rearview mirror, or a 2-way communication antenna.
Always install the antenna as high on the glass as possible if mounting on the windshield. Do not mount the
antenna to a metallic surface.
NOTE:
Do not place the antenna where it may interfere with the driver's vision. Some states prohibit
mounting anything on the windshield that may obstruct the driver’s vision.
