PRODUCT ASSEMBLY :
Attention:
All assembly parts must be locked into position
•
Locking the Lid to the Hopper:
JJust
place the Lid on top of body, push down To
lock into position. It is splash proof.
.
•
Installing the Bowl to the Base:
Insert
pins of the Bowl into two pillars beneath the
Base. Press down to lock the Bowl.
PROGRAMMING YOUR PET FEEDER:
NOTE: The main power switch, located
underneath of the Base, should already be
turned ON. Place the feeder so as the LCD
control panel is facing to you. In order to
preset desired preferences, press [OK]
after
completing
each
step
of
programming. Pressing [OK] will also
eventually return you to the Normal display
screen.
•
Set the Local Time, Select number of daily Meals
After the batteries are installed, switch the
On/Off button to On position. The LCD will display all features for 5 seconds. To set the Local Time,
