CLEANING & MAINTENANCE
1.Turn all switches to the OFF position.
2.Unplug the outer plug to the outlet .
3.Allow kettle to cool at least 1 hour before cleaning. DO NOT use ice or water to
cool down a hot kettle!
4. After cool, unplug the kettle motor plug and remove the kettle from main unit.
5. Fill ²⁄ ³ of Kettle with hot, soapy water and let sit for 15 – 20 minutes to cut the
grease. (Time may vary – use your own judgment depending on the amount of
cleaning necessary.)
6. Empty water. If necessary, use the scrubber side of a cleaning sponge to scrub
inside of Kettle.
7. Wipe the inside of the kettle with a clean, soft cloth. DO NOT use oven or abrasive
cleaners as they will damage the kettle.
8. clean the inside & outside of the main unit by wiping with a clean, soft ,moist
cloth.
CAUTION:
1. ALWAYS UNPLUG the equipment before cleaning or servicing.
2. DO NOT use ice or water to cool down a hot kettle!
3. DO NOT use oven or abrasive cleaners as they will damage the kettle.
4. DO NOT immerse any part of this equipment in water.
CUSTOMER SERVICE
www.rovsun.com
Phone service: (1) 855-882-2333
E-mail Service: [email protected]
(Working Day: MON-FRI 11:00AM-5:00PM ET)
!
