Zoeller ZCS, Руководство по эксплуатации

Страница: 20 / 48

Operating
19
Mode of warning lighting can by set using button and knob. There are four modes to
set:
The lights turn on automatically when a hydraulic function is activated (e.g. moving
press, lifter). They turn off when the hydraulic functions are turned off. They can also
be turned on and off manually.
The lights turn on automatically when the gear is in neutral and the hydraulic
function is activated. The lights are turned off when N gear is disengaged. They can
also be turned on and off manually.
The lights turn on automatically when the vehicle speed is less than or equal to 6
km/h and the hydraulic function is activated. The lights are turned off when the
speed exceeds 6 km/h. They can also be turned on and off manually.
The lights turn on automatically when the vehicle speed is less than or equal to 30
km/h and the hydraulic function is activated. The lights are turned off when the
speed exceeds 30 km/h. They can also be turned on and off manually.
The working lights can be configured by entering the submenu for the selected lights (on the
tailgate, on the upper side of the body, under the body). In the submenu, you can set different
light triggers and necessary conditions - you can turn on several triggers and conditions
simultaneously.
The lights turn on automatically when a hydraulic function is activated
(e.g. moving press, lifter). They turn off when the hydraulic functions are
turned off. They can also be turned on and off manually.
The lights turn on automatically when reverse gear is engaged. They turn
off when reverse gear is disengaged, after a defined period of time. The
time until the lights turn off can be set between 0-9 seconds. To do this,
hold down the function button for a while and change the value using
the knob. The lights can also be turned on and off manually.
This is a necessary condition - the lights only turn on when the vehicle's
running lights are on.
This is a necessary condition - the lights only turn on when the brake is
applied.
This is a necessary condition - the lights only turn on when the vehicle
does not exceed the set speed. The speed (from 0 to 30 km/h) can be
set by holding down the function button and selecting the value using
the knob.