Zoef Robot Bep, Быстрое руководство

Страница: 22 / 48

①
Adding water
Open the cover and inject the water into the water tank.
②
Paste wet dishcloth
A. Past wet dishcloth on holder,as shown in Fig: A
B. Install holder with wet dishcloth to bottom case,as shown in Fig: B
③
Install water tank component
Replace dust bin with Wet dishcloth component.
④
Mop the floor
To start any cleaning mode on demand,and then the machine starts mopping the floor.
3.5 Use of Wet dishcloth
This product is equipped with a wet dishcloth component, if you need mop the floor after Finished cleaning,
you can replace dust bin with Wet dishcloth component .Please refer to the maintenance section in this
manual for cleaning up.
EN-8
Tips
：
Please do not use the wet dishcloth component on the carpet.Please fold the edge of the carpet to avoid Dirtying
carpet.
Please pay attention to adding water or Cleaning up in time and remove the water tank when adding water.
Please moving the wet dishcloth component when changing.