15
GPS: OK/NO GPS
GSM Signal: 1-32 Note: The higher digit it shows; the better.
6.27 Terminal (local) Time Setting
Send SMS command “time+space+zone+pspace+time” to the device, If succeed, it will reply
“time OK”
For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is
minus, send SMS “time zone123456 -8”.
6.28 Reset Hardware
Send SMS “reset+password” to tracker device to reset the GSM module and
GPS module of the tracker device, it will reply “reset ok”.
6.29 GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS.
6.29.1 Configure APN
6.29.1.1 APN standards for Access Point Name and differs from country to country. For more
information about your local APN, please inquire with your local GPRS network operator.
6.29.1.2 Send a SMS command to tracker “APN+pa Space + your local APN” via a cell phone
and if succeeded, the tracker will reply “APN OK”.
For example: Send SMS command “APN123456 CMNET”. If succeeded, the tracker will reply “APN
OK”.
Notes: 123456 refer to password of tracker and CMNET is the
APN of one of china GPRS Network Operator (China mobile).
6.29.2 GPRS User Name and password Setup
6.29.2.1 In most countries, the user name and password involving GPRS login are not compulsorily
necessary, therefore, the entry can be skipped. As for those countries require user name and password,
please configure as following:
6.29.2.2 Send SMS “up+pspace+user+space+password” If succeeded, the tracker will reply
“user, password ok!”
