12
Send SMS command “arm+password” to the tracker device, the tracker enter armed state, and It will
reply “Tracker is activated”.
6.19.2 DISARM
Send SMS command " password" to the tracker device. Tracker enter disarmed state and
reply “Tracker is deactivated”. Then turn off alarm function and will not send alarm if shock sensor
and ACC alarm is triggered.
6.19.3
Set up disarm password
Send command “pspace+05+space+3” to tracker, the 2 digits number after the first space
means the times put the inductive key to top of the tracker; the number after the second space means error
times restriction, if wrong times exceed this number, tracker will be locked and send alarm to authorized
phone numbers, then disarm can be only operated from web platform or by SMS command.
The default times are 2 times, alarm will be triggered after two times errors.
6.20 Shock sensor Alarm
6.20.1
The tracker has a built-in 3-axis acceleration sensor, the tracker can detect it in arm state when
the bike move, tilt or shock. it wakes up and send SMS “Sensor alarm+lat/long” to the authorized
number, in SMS mode only one message was sent within 3 mins.
6.20.2
Sensitivity of shock sensor configurations:
First level: Alarm will be triggered after detect once slight vibration, send command"
senspspace+1" .
Second level: Alarm will be triggered after detect 8 times vibration in 2 seconds, send command"
senspspace+2".
Third level: Alarm will be triggered after detect 25 times vibration in 5 seconds, send command"
senspspace+3"
6.21 Sleep mode
Sleep Mode
In SMS mode
In GPRS mode
Sleep by
shock
No shock, the unit will enter sleep mode
with GPS off, GSM runs in low power
consumption. Shock, SMS ,calling can
awake the tracker to work.
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter sleep by
shock mode, and will be back to
online if shock or any other alarms
being triggered.
