Zodiac Zoom, Инструкция по эксплуатации, Страница: 14 / 20

SECTION 2 – INSTALLATION
2
ZODIAC ZOOM™ HOSE
Your cleaner is supplied with 10
metres of hose, made up of 10
sections, each 1 metre long. These
connect together to provide the
desired length of hose for your pool.
The optimal hose length will reach
across to the furthest point of your
pool plus one extra hose length. If
you have an extra large above ground
pool you may have to purchase extra 1 metre lengths, to suit your size of pool.
Before connecting the hose to the cleaner, place the hose weight approx. 0.5 metres
along the hose that attaches to the Zodiac ZOOM™ cleaner.
Switch on your filtration system. Place all the hose in the water, and place one end
of the hose over return inlet until
bubbles stop coming out of the hose.
Next hold the Zodiac ZOOM™
completely under the water and wait
until all air bubbles have escaped
from the cleaner then attach female
end of hose (with pink insert
attached) onto the extension pipe.
The hose protector is placed over
the section of hose that attaches into the skimmer box. Connect hose to AD Flow
Valve which is then fitted into the weir adaptor, which is then fitted into the vacuum
plate of the skimmer box.
• It is most important that the valve opening is pointing downwards so that it will
not suck air.
• The Zodiac ZOOM™ should move across the pool floor at 5-6 metres per
minute. This is achieved by adjusting the AD Flow Valve.
Diagram 3: Ideal Hose length
Diagram 4: Ideal Hose Length
Weir
Skimmer
Box
16773 Zodiac Manual 2/12/08 11:33 AM Page 14