11
2.3.3 Switching on the heat pump
• Check that the filtration pump timer is connected correctly; see “1.3.3 Connecting the filtration
pump (heating priority)”.
• Connect the power supply to the heat pump. The message
is displayed for several
seconds and the ON LED is lit.
• The screen displays
for several seconds and then the RUN LED is lit to confirm that the software has loaded
successfully.
•
Check the screen that displays:
The heat pump power is switched on
The installer must check the heat pump supply
voltage wiring (see “4.2 I Alarm display”).
Press and hold the key
(3 seconds).
The home screen displays:
The date and time set (see § “2.3.5 Adjusting the heat pump
timer (RTC)”
Water return temperature
dehumidifier heating
Water flow temperature
dehumidifier heating
Pool water measured temperature
If the heat pump is in standby, press one of the interface buttons briefly.
The interface language can be changed: English, French or Italian. See § “2.3.4 Set the interface language”
2.3.4 Set the interface language
• From the home screen press and hold
for 3 seconds,
•
Select “INSTALLATION MENU” and press
,
•
Select “MISCELLANEOUS” menu and press
,
•
Select the setting “PH09” and press
,
•
Select the language (English, French or Italian) and press
,
•
Press
to exit. Pressing
again takes you back to the main display.
