Zodiac Z260iQ, Быстрый старт

Страница: 7 / 168

7
User interface
❷ Use
3
Wi-Fi
Browse/
Return
Defrosting :
automatic and mandatory
process for the good operation of the
heat pump
Timer On/Off
Inverter mode
(left: ECOSILENCE, middle:
SMART, Right: BOOST)
Water inlet temp
Compressor running
Fan running
Filtration pump running
These 3 icons can be off if heating/
cooling is not needed (normal
behaviour)
- 24 -
Deforsting
Set temperature
Water temperature
REGULATION (ELECTRONIC CONTROLLER)
Start-up and Locking
Press 3s to unlock the control box.
Press 2s to turn the heat pump on or off. This button is also used to return to the main interface.
The lock activates automatically after 60 seconds of inactivity). When the cabinet is locked, the logo appears.
Operating Modes
Press the button to change the operating mode:
Then press to change the operating mode press
again to validate the change and return to the main
menu.
ECOHeatingmode: Choosethisheatingmodesothat
theheatpumpoperatessilently.
SMARTHeatingmode: Choosethisheatingmodefor
theheatpumptooperateina conventional manner
BOOSTheatingmode: Choosethisheatingmodeso
thattheheat pumpquicklyheats thewater inyour pool.
Automode: Theheatpumpintelligentlychooses themost
appropriateoperatingmodeaccordingtothesetpointtemperature.
S ILENTCoolingmode: Choose thiscoolingmodefor
theheatpumptooperatesilently.
ECOCoolingmode: Choosethiscoolingmodesothat
theheatpumpoperatesina conventionalmanner.
BOOSTCoolingmode: Choosethiscoolingmodefor
theheatpumpto operateina classic way.
Setting the required temperature
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press the and
buttons to change the set
temperature.
Clock setting
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press 2 times to
enter the clock setting interface.
The clock display flashes.
Step 3: Press to switch from
hours to minutes and validate by
pressing .
Step 4: Change hours/minutes by using and .
Step 5: Press the button 1s to confirm the setting
and return to the main menu.
Heating /Auto/
Cooling mode
Set time (clock)
Setpoint water
temperature
Parameters
Lock
Error
SET (setpoint water
temperature /
parameters)
Current time
(clock)
Validate/
Return
Browse
Mode Description
Heating
ECOSILENCE
Reduced power to further energy savings and lowest noise
level. Best to maintain the temperature when outside air
temperature is warm.
SMART
Automatic power adjustment depending on the need.
Chooses between ECOSILENCE and BOOST modes
automatically.
BOOST
Maximum power for fast heat-up. Best at the beginning of
the season to rise up the temperature or to maintain the
temperature when the outside temperature is cold.
AUTO
Heating/
Cooling
SMART
The heat pump intelligently chooses the most
appropriate operating mode according to the setpoint
temperature.
(recommended mode)
Cooling
ECOSILENCE
Cooling the pool at reduced power to further energy savings
and lowest noise level.
SMART
Automatic power adjustment depending on the need.
Chooses between ECOSILENCE and BOOST modes
automatically.
BOOST
Cooling the pool at maximum power for fast cooling.
Icons