3.4 Connecting Floating Cable to Control
Box
WARNING
Failure to comply with the following warnings can
result in permanent injury, electrocution or drowning.
PREVENT ELECTRICAL SHOCK
• Keep the control box at least 3.5 m from the edge
of the pool.
• The cleaner is to be installed in accordance with the
relevant requirements of the South African wiring
rules, Occupational Health and Safety Act, 1993
(Act no. 85 of 1993) schedule electrical installation
regulations. Also refer to the installation instructions
relating to the swimming pool equipment for which
the cleaner will be an integral part. The cleaner is
to be supplied through a Residual Current Device
(Earth Leakage) with a rated residual operating
current of 30mA.
• Do not use an extension cord to connect the control
box.
• Do not allow anyone to swim while the cleaner is in
the pool.
1.
Unscrew the protective cap for the power cable
from the side of the control box by turning
counter-clockwise (Figure 12).
Figure 12. Remove Protective Cap
3.3 Connecting the Control box to Caddy
1.
Align the bottom of the control box with the
notch at bottom of the control box hook on the
caddy (Figure 10).
Figure 10. Align Control box with Caddy Hook
2.
Press control box onto the caddy hook until it
snaps and locks into position (Figure 11).
Figure 11. Attach the Control box onto Caddy
7
H0503800_REV A
