Section 5. Programming the
Cleaner
The control box allows you to program the cleaner to run
each day for up to 7 days, perfect for when you go away on
holidays.
NOTE:
You cannot change programming or display current
day and time during a cleaning cycle.
5.1 Displaying Current Day and Time
• Press
to display curent day and time in
24-hour clock format.
Current day and time is displayed for 5 seconds.
5.2 Changing the Clock Day and Time
1.
Press and hold
for three (3) seconds.
All days of the week flash twice.
2. Press
or
buttons to cycle through
seven (7) days and display desired day.
3. Press
to select.
Current hour setting flashes.
4. Press
or
buttons to cycle through
24 hours and display desired hour setting.
NOTE:
Control box is set to display time in 24-hour
clock format. Time setting will cycle through 1-24.
5. Press
to select.
Current minutes setting flashes.
6. Press
or
buttons to cycle
through 1-59 minutes and display desired
minutes setting.
7. Press
to select.
8. Press
to set time and exit the menu.
9. Press
to display current day and time
setting and verify the time you set is correct.
5.3 Changing Default Cleaning Times
Use
to change cleaning surface setting.
Default cleaning times are:
Floor Only:
1 hour 30 minutes
Floor and Walls:
2 hours 30 minutes
Waterline:
Variable cleaning time depending on settings
1. Press
or
buttons to increase or
decrease cleaning time in 30-minute increments.
2. Press
to select.
5.4 Programming Cleaning Cycles
You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
13
H0503800_REV A