Page
2
Zodiac Voyager RE Robotic Pool Cleaners
|
Owner's Manual
Zodiac
Voyager RE
Robotic Pool Cleaners |
Owner’s Manual
Page 7
Figure 4. Twist Handnut to Secure Frame
5.
Snap two (2) support blocks into place
(Figure 5).
6.
Slide axle and hubcap piece through center
of wheel and attach to base unit. Snap
locking clip into place to secure wheel.
Repeat to attach both wheels (Figure 5).
Figure 5. Snap in Support Blocks and Attach
Wheels
7.
Slide the Control Unit base / caddy handle
attachment down over the metal tubing until
it snaps into place. (See Figure 6).
Figure 6. Attach Caddy Handle
8.
Align cleaner hook pins with the top holes
in the handle tube and snap into place
(Figure 7).
Figure 7. Snap Cleaner Hook into Place
9.
Align the bottom of the Control Unit with the
notch at bottom of the Control Unit hook on
the caddy (Figure 8).
Page
7
Zodiac Voyager RE Robotic Pool Cleaners | Owner's Manual
