![background image](http://html1.mh-extra.com/html/zodiac/transport-80/transport-80_manual_3995777066.webp)
EN
GLIS
H
66
¢
Fixed installation
In order to use this transceiver for fixed station 1 operation, you will
need a separate 13.8 V DC power supply (optional).
The recommended current capacity of power supply is 12 A.
1.
Connect the DC power cable to the regulated DC power supply and ensure that the
polarities are correct (Red: positive, Black: negative).
• Do not directly connect the transceiver to an AC outlet.
• Use the supplied DC power cable to connect the transceiver to a regulated power
supply.
• Do not substitute a cable with smaller gauge wires.
2.
Connect the transceiver's DC power connector to the connector on the DC power cable.
Press the connectors firmly together until the locking tab clicks.
¢
Replacing fuses
If the fuse blows, determine the cause, then correct the problem.
After the problem is resolved, replace the fuse. If newly installed fuses continue to blow,
disconnect the power cable and contact your authorized
dealer or an authorized
service center for assistance.
Содержание Transport 80
