6
When:
What to do:
Every day Run spa according to recommendations supplied to you by
the manufacturer of your spa.
Before
Test the water with Nature2 Spa Test Strip
each use equivalent). If the MPS
2
level is low, add
1 tablespoon of MPS
2
to spa per 250 gallons (approx.
1000 liters). Note: 1 tablespoon is approximately 1/2
ounce or 16 grams.
Use the Nature2 Spa Test Strip (or equivalent) to test the
spa water after each addition of MPS
2
.
If the test strip indicates levels below the OK range, add 1
tablespoon MPS
2
to spa per 250 gallons and re-test. Enter
spa only after test strip indicates a sufficient level of MPS
2
.
After
Add 1 tablespoon of MPS
2
to spa per 250 gallons
each use (approx. 1000 liters).
Once
Adjust the pH, total alkalinity, and hardness as
per week needed. A convenient way to test pH and total
alkalinity is the Nature2 Spa Test Strip.
Every 4
Drain and refill your spa. Replace Nature2 Spa and
months
repeat sanitizer start-up.
Operation and Maintenance
There is one (1) recipe for maintaining clean, clear, sanitized
water with minimum time and effort. This recipe provides the
easiest and most economical way to care for your Nature
2
®
Spa.
Low-Chlorine Recipe
Ingredients:
• Nature
2
Spa
• Non-chlorine oxidizer (MPS
2
)
3
• Nature
2
Spa Test Strips
4
, or equivalent (MPS
2
, pH,
and total alkalinity)
• pH, hardness and total alkalinity adjusting
chemicals
• Dichlor
1
, EPA registered source
