3/10
THE INFLATION SYSTEM
The inflation system is composed of:
INFLATION PUMP
(a) adaptater
(b) hose tip
(c) hose base
(d) air outliet
To inflate :
Place the hose tip in the air outlet,
To inflate correctly, the pump should be flat
on the ground,
The boat will inflate rapidly if pumping is done
at a regular calm rhythm,
Use the adapter that corresponds to the
diameter of the hose tip valve
STANDARD VALVE
(1) cap (2) valve (3) base
To activate the valve in the inflation position :
Unscrew the cap,
Screw the valve into its base (thigten fully
without damaging the thread), keep the cap
at hand.
To close the valve after inflation :
Screw on the cap.
To deflate the buoyancy tube :
Unscrew the valve from its base.
(1) valve base (2) I/C valve
(3) valve insert (4) cap cover
(5) cap
To activate the vavlves in the inflation
position :
Put the I/C valve in the « inflation » zone
(red),
Unscrew the cap,
Screw the valve insert onto the base
(energically, but don’t damage the thread)
To close the valves after inflation :
Put the I/C valve in the « navigation » zone
(green),
Screw the cap.
INTERCOMMUNICATION VALVE (I/C VALVE)
Inflation position
Navigation position