5/20
INFLATION SYSTEM (CON’T)
RAPID INFLATION PORTS - SCUBA
(1) Screw on valve cover
(2) ‘O’ ring
(3) Valve base is part of the boat.
The rapid inflation valve ports allow the boat
to be inflated using a SCUBA cylinder and an
optional quick inflation system.
When inflating manually, the rapid inflation
ports must remain plugged.
METALLIC DEFLATION VALVE
(1) Metal cap and rubber washer
(2) Valve body and rubber washer
(3) Rubber diaphragm
(4) Metal Nut
(5) Metal Washer
(6) Recessed flange
(7) Valve base
The metallic deflation valve is located on the
bow. This valve allows connection to an
optional Venturi deflation system.
REAR DEFLATION VALVES
(1) Valve Cap
(2) Superior valve body with rubber washer
(3) Recessed flange
(4) Inferior valve body
(5) Rubber valve with metal spring
The rear deflation valves are located on the
cones, one on each side.
When deflating:
-
Remove the valve cap.
-
Press the rubber valve down.
-
Rotate ¼ of a turn anticlockwise.
When inflating:
-
Rotate ¼ of a turn clockwise to close
the rubber valve.
-
Screw on the valve cap.