97197
December 19, 2003
24
Oval Pool
-
Escapade
STEP 11. INSTALL NO DIVING DECALS
Place "NO DIVING" decals on the top ledges (Figure 23)
.
Place one of these decals at the entry/exit of your pool (Figure
23). Place the second decal directly across the pool from the entry/exit location (Figure 23). Place the remaining two
decals at 90° to entry/exit as shown in Figure 23.
When pool is filled with water to correct skimmer level, install the two NO DIVING warning decals which you set aside
earlier.
a. Apply decals to the liner just above the maximum water level and just below the top ledge.
b. Install one decal at the entry/exit location. Install second decal directly across the pool from the entry/exit location
(Figure 24).
STEP 12. INSTALL NO DIVING SIGN
Your 9" x 11" NO DIVING sign must be posted in plain sight near your pool entry/exit location to remind pool users
of the importance of this safety information.
If you are not installing a fence or a deck on which to post your sign, you may attach it to the pool top ledge (Figure
24). Drill 1/8" diameter holes in the outside of the top ledge (adjacent to the entry/exit location) and fasten sign
with the enclosed attachment wires.
LINER NO DIVING DECAL
TOP LEDGE WITH DECAL
DESIGNATE POOL
ENTRY AND EXIT
INSTALL NO DIVING SIGN
ADJACENT TO POOL ENTRY/EXIT
NO DIVING DECAL
FOR TOP LEDGES
FIG. 23
FIG. 24
INSTALL NO DIVING DECALS
INSTALL NO DIVING SIGN
STEP 11
STEP 12
Содержание Escapade
Страница 30: ...97197 December19 2003 30 Oval Pool Escapade...
