background image

4.2 Language selection

The default language for your Ei is French. However the appliance is capable of displaying most 
messages in the following languages: French, English, Spanish, Italian, German, Dutch and Afrikaner.

To select your language:

1.   Switch on the Ei.

2.  Wait for the completion of the initial boot sequence on the LCD screen (About 5 seconds).

3.  Press and maintain pressed down the 

 key.

After about 5 seconds the current language will be displayed on the screen.

4.  Maintain the 

 key pressed down until the desired language is displayed on the LCD screen.

5.  Release the 

 key when the desired language is displayed. It will now be the language used to 

display messages on the LCD.

4.3 Setting the clock (clock)

IMPORTANT REMARK:

 Your Ei Zodiac chlorinator is equipped with an internal memory. During 

the fi rst Ei electrical connection (Or upon re-initializing) it is important to leave the power on for at 
least 24 hours uninterrupted (permanent power supply or forced operation). This will ensure that the 
internal accumulator will be suffi ciently charged to store in memory all the operating parameters.

1.   Turn power on.

2.  Wait until the successful completion of the initialization sequence on the LCD screen (About 5 seconds).

3.  Press down and maintain down the 

 key.

4.  While maintaining the 

 key pressed, press the 

 key, in order to set the hours, until you reach 

the desired hours value. (The 

 key can be maintained pressed to accelerate the incrementation).

5.  While maintaining the 

 key pressed, press down the 

 key, in order to set the minutes, 

until you reach the adjustment wanted. (The 

 key can be maintained pressed to accelerate the 

incrementation).

6.  Release the 

 key - the correct time has now been set on the clock.

NOTE: The clock uses a 24 hours display format.

Resetting the appliance:

1.   When on the default LCD display press the 

 key.

2.  After a few seconds the Ei device restarts and the clock is reset (‘00:00’).

3.  Set the clock time using the procedure described above (

Setting the time

).

WARNING:

 The reinitialisation of the appliance causes the loss of all previous settings (clock, 

programmer…)!

!

!

26

Содержание EI2 Expert 18SWC EU VS



















Отзывы: