![background image](http://html.mh-extra.com/html/zodiac/easy-hunt-ii/easy-hunt-ii_manual_936336042.webp)
EN
GLIS
H
42
¢
QUICK GUIDE
¢
Power On / Off
To turn the radio on, turn the on-off / Volume control knob clockwise.
To turn the radio off, turn the on-off / Volume control knob
counterclockwise until you hear a click.
¢
Adjusting the radio volume
Turn the on-off / Volume control knob to adjust the volume level.
¢
Channel Selection
•
Select the desired channel by using Up / Down key.
•
Each press increases or decreases the channel number.
•
The channels increase constantly in case you press and hold
Up key or the channel decrease constantly when
you press and hold Down key.
¢
Reception Selection
•
Select the wanted radio channel.
•
The LED will give a green light during the reception of signals.
•
If the LED is blinking green, it indicates that the sender
is using another pilot tone CTCSS code,
than set in your receiver.
Try to change the pilot tone by using the CTCSS menu.
¢
Transmission
Before transmitting, monitor the channel and make sure it is clear.
•
To transmit, press and hold the PTT switch.
Speak into the microphone in a normal voice.
•
To return to the receive mode, release the PTT switch.
¢
Squelch
•
Press and hold [SQ] for approx. 3 seconds to enter SQ setting mode.
•
Press [▲] or [▼] until “SQELCH” is displayed.
•
Select the desired level with the [▲] or [▼].
•
Press and hold [SQ] or [PTT] (11)for approx. 3 seconds to confirm.
¢
Scanning
•
Press and hold [SC] for approx. 3 seconds to start scanning.
•
Press and hold [SC] or [PTT] for approx. 3 seconds to stop scanning again.
ON/OFF/VOLUME
LED Indicator
[▲]
UP
[▼]
DN
[PTT]
SC
SQ
Содержание Easy Hunt II
Страница 1: ...SVENSKA NORSK ENGLISH Version 3 06 04 15 ...
Страница 57: ...57 ENGLISH NOTES ...
Страница 58: ......